ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('NSERIES_NOGUARD_PADDL_SW0001','2011-11-22T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#130154=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#130156=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#130155);
#130157=(CONVERSION_BASED_UNIT('INCH',#130156)LENGTH_UNIT()NAMED_UNIT(#130154));
#130160=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #130159);
#130161=(CONVERSION_BASED_UNIT('DEGREE',#130160)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#130163=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.150000765995E-5),#130157, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#130166=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#130167=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#130166);
#130168=DESIGN_CONTEXT('',#130166,'design');
#130169=MECHANICAL_CONTEXT('',#130166,'mechanical');
#130170=PRODUCT('NSERIES_NOGUARD_PADDL_SW0001','NSERIES_NOGUARD_PADDL_SW0001', 'NOT SPECIFIED',(#130169));
#130171=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #130170,.MADE.);
#130175=PRODUCT_CATEGORY('part','');
#130176=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#130170));
#130155=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#130159=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#130162=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#130164=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#130163))GLOBAL_UNIT_ASSIGNED_CONTEXT((#130157,#130161,#130162))REPRESENTATION_CONTEXT('ID1','3'));
#130172=PRODUCT_DEFINITION('design','',#130171,#130168);
#130173=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR NSERIES_NOGUARD_PADDL_SW0001.', #130172);
ENDSEC;
END-ISO-10303-21;