ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('NSERIES_NOGUARD_HOLEP_SW0001','2011-11-23T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#125057=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#125059=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#125058);
#125060=(CONVERSION_BASED_UNIT('INCH',#125059)LENGTH_UNIT()NAMED_UNIT(#125057));
#125063=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #125062);
#125064=(CONVERSION_BASED_UNIT('DEGREE',#125063)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#125066=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.150000765995E-5),#125060, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#125069=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#125070=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#125069);
#125071=DESIGN_CONTEXT('',#125069,'design');
#125072=MECHANICAL_CONTEXT('',#125069,'mechanical');
#125073=PRODUCT('NSERIES_NOGUARD_HOLEP_SW0001','NSERIES_NOGUARD_HOLEP_SW0001', 'NOT SPECIFIED',(#125072));
#125074=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #125073,.MADE.);
#125078=PRODUCT_CATEGORY('part','');
#125079=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#125073));
#125058=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#125062=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#125065=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#125067=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#125066))GLOBAL_UNIT_ASSIGNED_CONTEXT((#125060,#125064,#125065))REPRESENTATION_CONTEXT('ID1','3'));
#125075=PRODUCT_DEFINITION('design','',#125074,#125071);
#125076=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR NSERIES_NOGUARD_HOLEP_SW0001.', #125075);
ENDSEC;
END-ISO-10303-21;