ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('LSERIES_250QC_HOLEPLU_SW0001','2011-11-21T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#111833=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#111835=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#111834);
#111836=(CONVERSION_BASED_UNIT('INCH',#111835)LENGTH_UNIT()NAMED_UNIT(#111833));
#111839=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #111838);
#111840=(CONVERSION_BASED_UNIT('DEGREE',#111839)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#111842=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.560338351794E-5),#111836, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#111845=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#111846=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#111845);
#111847=DESIGN_CONTEXT('',#111845,'design');
#111848=MECHANICAL_CONTEXT('',#111845,'mechanical');
#111849=PRODUCT('LSERIES_250QC_HOLEPLU_SW0001','LSERIES_250QC_HOLEPLU_SW0001', 'NOT SPECIFIED',(#111848));
#111850=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #111849,.MADE.);
#111854=PRODUCT_CATEGORY('part','');
#111855=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#111849));
#111834=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#111838=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#111841=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#111843=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#111842))GLOBAL_UNIT_ASSIGNED_CONTEXT((#111836,#111840,#111841))REPRESENTATION_CONTEXT('ID1','3'));
#111851=PRODUCT_DEFINITION('design','',#111850,#111847);
#111852=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LSERIES_250QC_HOLEPLU_SW0001.', #111851);
ENDSEC;
END-ISO-10303-21;