ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('LSERIES_187QC_HOLEPLU_SW0001','2011-11-22T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#141043=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#141045=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#141044);
#141046=(CONVERSION_BASED_UNIT('INCH',#141045)LENGTH_UNIT()NAMED_UNIT(#141043));
#141049=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #141048);
#141050=(CONVERSION_BASED_UNIT('DEGREE',#141049)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#141052=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.560338351794E-5),#141046, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#141055=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#141056=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#141055);
#141057=DESIGN_CONTEXT('',#141055,'design');
#141058=MECHANICAL_CONTEXT('',#141055,'mechanical');
#141059=PRODUCT('LSERIES_187QC_HOLEPLU_SW0001','LSERIES_187QC_HOLEPLU_SW0001', 'NOT SPECIFIED',(#141058));
#141060=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #141059,.MADE.);
#141064=PRODUCT_CATEGORY('part','');
#141065=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#141059));
#141044=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#141048=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#141051=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#141053=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#141052))GLOBAL_UNIT_ASSIGNED_CONTEXT((#141046,#141050,#141051))REPRESENTATION_CONTEXT('ID1','3'));
#141061=PRODUCT_DEFINITION('design','',#141060,#141057);
#141062=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LSERIES_187QC_HOLEPLU_SW0001.', #141061);
ENDSEC;
END-ISO-10303-21;