ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('LSERIES_187QC_GUARD_P_SW0001','2011-11-22T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#151103=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#151105=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#151104);
#151106=(CONVERSION_BASED_UNIT('INCH',#151105)LENGTH_UNIT()NAMED_UNIT(#151103));
#151109=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #151108);
#151110=(CONVERSION_BASED_UNIT('DEGREE',#151109)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#151112=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.551141728785E-5),#151106, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#151115=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#151116=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#151115);
#151117=DESIGN_CONTEXT('',#151115,'design');
#151118=MECHANICAL_CONTEXT('',#151115,'mechanical');
#151119=PRODUCT('LSERIES_187QC_GUARD_P_SW0001','LSERIES_187QC_GUARD_P_SW0001', 'NOT SPECIFIED',(#151118));
#151120=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #151119,.MADE.);
#151124=PRODUCT_CATEGORY('part','');
#151125=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#151119));
#151104=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#151108=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#151111=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#151113=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#151112))GLOBAL_UNIT_ASSIGNED_CONTEXT((#151106,#151110,#151111))REPRESENTATION_CONTEXT('ID1','3'));
#151121=PRODUCT_DEFINITION('design','',#151120,#151117);
#151122=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR LSERIES_187QC_GUARD_P_SW0001.', #151121);
ENDSEC;
END-ISO-10303-21;