ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('L2_STD_SW0001','2011-11-28T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#363698=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#363700=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#363699);
#363701=(CONVERSION_BASED_UNIT('INCH',#363700)LENGTH_UNIT()NAMED_UNIT(#363698));
#363704=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #363703);
#363705=(CONVERSION_BASED_UNIT('DEGREE',#363704)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#363707=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.617667215588E-4),#363701, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#363718=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#363719=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#363718);
#363720=DESIGN_CONTEXT('',#363718,'design');
#363721=MECHANICAL_CONTEXT('',#363718,'mechanical');
#363722=PRODUCT('L2_STD_SW0001','L2_STD_SW0001','NOT SPECIFIED',(#363721));
#363723=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #363722,.MADE.);
#363727=PRODUCT_CATEGORY('part','');
#363728=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#363722));
#363699=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#363703=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#363706=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#363708=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#363707))GLOBAL_UNIT_ASSIGNED_CONTEXT((#363701,#363705,#363706))REPRESENTATION_CONTEXT('ID1','3'));
#363724=PRODUCT_DEFINITION('design','',#363723,#363720);
#363725=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR L2_STD_SW0001.',#363724);
ENDSEC;
END-ISO-10303-21;