ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('L2_PTR_SW0001','2011-11-28T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#364290=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#364292=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#364291);
#364293=(CONVERSION_BASED_UNIT('INCH',#364292)LENGTH_UNIT()NAMED_UNIT(#364290));
#364296=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #364295);
#364297=(CONVERSION_BASED_UNIT('DEGREE',#364296)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#364299=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.617667215572E-4),#364293, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#364310=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#364311=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#364310);
#364312=DESIGN_CONTEXT('',#364310,'design');
#364313=MECHANICAL_CONTEXT('',#364310,'mechanical');
#364314=PRODUCT('L2_PTR_SW0001','L2_PTR_SW0001','NOT SPECIFIED',(#364313));
#364315=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #364314,.MADE.);
#364319=PRODUCT_CATEGORY('part','');
#364320=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#364314));
#364291=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#364295=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#364298=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#364300=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#364299))GLOBAL_UNIT_ASSIGNED_CONTEXT((#364293,#364297,#364298))REPRESENTATION_CONTEXT('ID1','3'));
#364316=PRODUCT_DEFINITION('design','',#364315,#364312);
#364317=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR L2_PTR_SW0001.',#364316);
ENDSEC;
END-ISO-10303-21;