ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('L1_STD_SW0001','2011-11-28T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#217975=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#217977=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#217976);
#217978=(CONVERSION_BASED_UNIT('INCH',#217977)LENGTH_UNIT()NAMED_UNIT(#217975));
#217981=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #217980);
#217982=(CONVERSION_BASED_UNIT('DEGREE',#217981)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#217984=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.617667215588E-4),#217978, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#217995=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#217996=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#217995);
#217997=DESIGN_CONTEXT('',#217995,'design');
#217998=MECHANICAL_CONTEXT('',#217995,'mechanical');
#217999=PRODUCT('L1_STD_SW0001','L1_STD_SW0001','NOT SPECIFIED',(#217998));
#218000=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #217999,.MADE.);
#218004=PRODUCT_CATEGORY('part','');
#218005=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#217999));
#217976=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#217980=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#217983=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#217985=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#217984))GLOBAL_UNIT_ASSIGNED_CONTEXT((#217978,#217982,#217983))REPRESENTATION_CONTEXT('ID1','3'));
#218001=PRODUCT_DEFINITION('design','',#218000,#217997);
#218002=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR L1_STD_SW0001.',#218001);
ENDSEC;
END-ISO-10303-21;