ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CX2_STUD_JUMPER_SW0001','2011-12-01T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#227331=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#227333=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#227332);
#227334=(CONVERSION_BASED_UNIT('INCH',#227333)LENGTH_UNIT()NAMED_UNIT(#227331));
#227337=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #227336);
#227338=(CONVERSION_BASED_UNIT('DEGREE',#227337)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#227340=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-4),#227334,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#227343=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#227344=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#227343);
#227345=DESIGN_CONTEXT('',#227343,'design');
#227346=MECHANICAL_CONTEXT('',#227343,'mechanical');
#227347=PRODUCT('CX2_STUD_JUMPER_SW0001','CX2_STUD_JUMPER_SW0001', 'NOT SPECIFIED',(#227346));
#227348=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #227347,.MADE.);
#227352=PRODUCT_CATEGORY('part','');
#227353=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#227347));
#227332=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#227336=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#227339=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#227341=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#227340))GLOBAL_UNIT_ASSIGNED_CONTEXT((#227334,#227338,#227339))REPRESENTATION_CONTEXT('ID1','3'));
#227349=PRODUCT_DEFINITION('design','',#227348,#227345);
#227350=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CX2_STUD_JUMPER_SW0001.', #227349);
ENDSEC;
END-ISO-10303-21;