ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CX2_STUD_AUX_SW0001','2011-12-01T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#245163=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#245165=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#245164);
#245166=(CONVERSION_BASED_UNIT('INCH',#245165)LENGTH_UNIT()NAMED_UNIT(#245163));
#245169=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #245168);
#245170=(CONVERSION_BASED_UNIT('DEGREE',#245169)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#245172=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-4),#245166,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#245175=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#245176=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#245175);
#245177=DESIGN_CONTEXT('',#245175,'design');
#245178=MECHANICAL_CONTEXT('',#245175,'mechanical');
#245179=PRODUCT('CX2_STUD_AUX_SW0001','CX2_STUD_AUX_SW0001','NOT SPECIFIED',( #245178));
#245180=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #245179,.MADE.);
#245184=PRODUCT_CATEGORY('part','');
#245185=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#245179));
#245164=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#245168=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#245171=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#245173=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#245172))GLOBAL_UNIT_ASSIGNED_CONTEXT((#245166,#245170,#245171))REPRESENTATION_CONTEXT('ID1','3'));
#245181=PRODUCT_DEFINITION('design','',#245180,#245177);
#245182=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CX2_STUD_AUX_SW0001.',#245181);
ENDSEC;
END-ISO-10303-21;