ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CX2_SCREW_JUMPER_SW0001','2011-12-01T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#254518=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#254520=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#254519);
#254521=(CONVERSION_BASED_UNIT('INCH',#254520)LENGTH_UNIT()NAMED_UNIT(#254518));
#254524=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #254523);
#254525=(CONVERSION_BASED_UNIT('DEGREE',#254524)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#254527=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.371845065214E-4),#254521, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#254530=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#254531=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#254530);
#254532=DESIGN_CONTEXT('',#254530,'design');
#254533=MECHANICAL_CONTEXT('',#254530,'mechanical');
#254534=PRODUCT('CX2_SCREW_JUMPER_SW0001','CX2_SCREW_JUMPER_SW0001', 'NOT SPECIFIED',(#254533));
#254535=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #254534,.MADE.);
#254539=PRODUCT_CATEGORY('part','');
#254540=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#254534));
#254519=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#254523=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#254526=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#254528=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#254527))GLOBAL_UNIT_ASSIGNED_CONTEXT((#254521,#254525,#254526))REPRESENTATION_CONTEXT('ID1','3'));
#254536=PRODUCT_DEFINITION('design','',#254535,#254532);
#254537=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CX2_SCREW_JUMPER_SW0001.', #254536);
ENDSEC;
END-ISO-10303-21;