ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CM2_STUD_REC','2012-01-26T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#187500=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#187502=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#187501);
#187503=(CONVERSION_BASED_UNIT('INCH',#187502)LENGTH_UNIT()NAMED_UNIT(#187500));
#187506=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #187505);
#187507=(CONVERSION_BASED_UNIT('DEGREE',#187506)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#187509=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.432829118603E-4),#187503, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#187520=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#187521=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#187520);
#187522=DESIGN_CONTEXT('',#187520,'design');
#187523=MECHANICAL_CONTEXT('',#187520,'mechanical');
#187524=PRODUCT('CM2_STUD_REC','CM2_STUD_REC','NOT SPECIFIED',(#187523));
#187525=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #187524,.MADE.);
#187529=PRODUCT_CATEGORY('part','');
#187530=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#187524));
#187501=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#187505=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#187508=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#187510=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#187509))GLOBAL_UNIT_ASSIGNED_CONTEXT((#187503,#187507,#187508))REPRESENTATION_CONTEXT('ID1','3'));
#187526=PRODUCT_DEFINITION('design','',#187525,#187522);
#187527=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CM2_STUD_REC.',#187526);
ENDSEC;
END-ISO-10303-21;