ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CM1_STUD','2012-01-26T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#156454=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#156456=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#156455);
#156457=(CONVERSION_BASED_UNIT('INCH',#156456)LENGTH_UNIT()NAMED_UNIT(#156454));
#156460=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #156459);
#156461=(CONVERSION_BASED_UNIT('DEGREE',#156460)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#156463=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.833332698009E-5),#156457, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#156474=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#156475=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#156474);
#156476=DESIGN_CONTEXT('',#156474,'design');
#156477=MECHANICAL_CONTEXT('',#156474,'mechanical');
#156478=PRODUCT('CM1_STUD','CM1_STUD','NOT SPECIFIED',(#156477));
#156479=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #156478,.MADE.);
#156483=PRODUCT_CATEGORY('part','');
#156484=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#156478));
#156455=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#156459=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#156462=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#156464=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#156463))GLOBAL_UNIT_ASSIGNED_CONTEXT((#156457,#156461,#156462))REPRESENTATION_CONTEXT('ID1','3'));
#156480=PRODUCT_DEFINITION('design','',#156479,#156476);
#156481=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CM1_STUD.',#156480);
ENDSEC;
END-ISO-10303-21;