ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CA2_STUD_REC','2012-01-25T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#213585=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#213587=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#213586);
#213588=(CONVERSION_BASED_UNIT('INCH',#213587)LENGTH_UNIT()NAMED_UNIT(#213585));
#213591=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #213590);
#213592=(CONVERSION_BASED_UNIT('DEGREE',#213591)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#213594=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.833332698009E-5),#213588, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#213597=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#213598=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#213597);
#213599=DESIGN_CONTEXT('',#213597,'design');
#213600=MECHANICAL_CONTEXT('',#213597,'mechanical');
#213601=PRODUCT('CA2_STUD_REC','CA2_STUD_REC','NOT SPECIFIED',(#213600));
#213602=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #213601,.MADE.);
#213606=PRODUCT_CATEGORY('part','');
#213607=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#213601));
#213586=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#213590=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#213593=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#213595=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#213594))GLOBAL_UNIT_ASSIGNED_CONTEXT((#213588,#213592,#213593))REPRESENTATION_CONTEXT('ID1','3'));
#213603=PRODUCT_DEFINITION('design','',#213602,#213599);
#213604=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CA2_STUD_REC.',#213603);
ENDSEC;
END-ISO-10303-21;