ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CA2_STUD_LIST','2012-01-25T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#214669=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#214671=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#214670);
#214672=(CONVERSION_BASED_UNIT('INCH',#214671)LENGTH_UNIT()NAMED_UNIT(#214669));
#214675=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #214674);
#214676=(CONVERSION_BASED_UNIT('DEGREE',#214675)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#214678=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.833332698009E-5),#214672, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#214681=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#214682=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#214681);
#214683=DESIGN_CONTEXT('',#214681,'design');
#214684=MECHANICAL_CONTEXT('',#214681,'mechanical');
#214685=PRODUCT('CA2_STUD_LIST','CA2_STUD_LIST','NOT SPECIFIED',(#214684));
#214686=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #214685,.MADE.);
#214690=PRODUCT_CATEGORY('part','');
#214691=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#214685));
#214670=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#214674=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#214677=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#214679=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#214678))GLOBAL_UNIT_ASSIGNED_CONTEXT((#214672,#214676,#214677))REPRESENTATION_CONTEXT('ID1','3'));
#214687=PRODUCT_DEFINITION('design','',#214686,#214683);
#214688=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CA2_STUD_LIST.',#214687);
ENDSEC;
END-ISO-10303-21;