ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CA1_STUD_AUX','2012-01-25T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#148418=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#148420=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#148419);
#148421=(CONVERSION_BASED_UNIT('INCH',#148420)LENGTH_UNIT()NAMED_UNIT(#148418));
#148424=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #148423);
#148425=(CONVERSION_BASED_UNIT('DEGREE',#148424)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#148427=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.833332698009E-5),#148421, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#148430=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#148431=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#148430);
#148432=DESIGN_CONTEXT('',#148430,'design');
#148433=MECHANICAL_CONTEXT('',#148430,'mechanical');
#148434=PRODUCT('CA1_STUD_AUX','CA1_STUD_AUX','NOT SPECIFIED',(#148433));
#148435=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #148434,.MADE.);
#148439=PRODUCT_CATEGORY('part','');
#148440=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#148434));
#148419=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#148423=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#148426=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#148428=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#148427))GLOBAL_UNIT_ASSIGNED_CONTEXT((#148421,#148425,#148426))REPRESENTATION_CONTEXT('ID1','3'));
#148436=PRODUCT_DEFINITION('design','',#148435,#148432);
#148437=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CA1_STUD_AUX.',#148436);
ENDSEC;
END-ISO-10303-21;