ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('CA1_STUD','2012-01-25T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#144844=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#144846=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#144845);
#144847=(CONVERSION_BASED_UNIT('INCH',#144846)LENGTH_UNIT()NAMED_UNIT(#144844));
#144850=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #144849);
#144851=(CONVERSION_BASED_UNIT('DEGREE',#144850)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#144853=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.833332698009E-5),#144847, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#144856=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#144857=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#144856);
#144858=DESIGN_CONTEXT('',#144856,'design');
#144859=MECHANICAL_CONTEXT('',#144856,'mechanical');
#144860=PRODUCT('CA1_STUD','CA1_STUD','NOT SPECIFIED',(#144859));
#144861=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #144860,.MADE.);
#144865=PRODUCT_CATEGORY('part','');
#144866=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#144860));
#144845=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#144849=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#144852=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#144854=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#144853))GLOBAL_UNIT_ASSIGNED_CONTEXT((#144847,#144851,#144852))REPRESENTATION_CONTEXT('ID1','3'));
#144862=PRODUCT_DEFINITION('design','',#144861,#144858);
#144863=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR CA1_STUD.',#144862);
ENDSEC;
END-ISO-10303-21;