ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('4-POLE_SW0001','2023-05-10T14:14:03',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2021284','CREO PARAMETRIC BY PTC INC, 2021284','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#354262=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#354264=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#354263);
#354265=(CONVERSION_BASED_UNIT('INCH',#354264)LENGTH_UNIT()NAMED_UNIT(#354262));
#354268=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #354267);
#354269=(CONVERSION_BASED_UNIT('DEGREE',#354268)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#354271=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-4),#354265,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#354272=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#354271))GLOBAL_UNIT_ASSIGNED_CONTEXT((#354265,#354269,#354270))REPRESENTATION_CONTEXT('ID1','3'));
#354274=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#354275=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#354274);
#354276=DESIGN_CONTEXT('',#354274,'design');
#354277=MECHANICAL_CONTEXT('',#354274,'mechanical');
#354278=PRODUCT('4-POLE_SW0001','4-POLE_SW0001','NOT SPECIFIED',(#354277));
#354279=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #354278,.MADE.);
#354283=PRODUCT_CATEGORY('part','');
#354284=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#354278));
#354263=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#354267=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#354270=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#354280=PRODUCT_DEFINITION('design','',#354279,#354276);
#354281=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 4-POLE_SW0001.',#354280);
ENDSEC;
END-ISO-10303-21;