ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('1-POLE-57_SW0001','2023-05-10T14:12:30',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2021284','CREO PARAMETRIC BY PTC INC, 2021284','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#115373=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#115375=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#115374);
#115376=(CONVERSION_BASED_UNIT('INCH',#115375)LENGTH_UNIT()NAMED_UNIT(#115373));
#115379=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #115378);
#115380=(CONVERSION_BASED_UNIT('DEGREE',#115379)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#115382=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-4),#115376,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#115383=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#115382))GLOBAL_UNIT_ASSIGNED_CONTEXT((#115376,#115380,#115381))REPRESENTATION_CONTEXT('ID1','3'));
#115385=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#115386=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#115385);
#115387=DESIGN_CONTEXT('',#115385,'design');
#115388=MECHANICAL_CONTEXT('',#115385,'mechanical');
#115389=PRODUCT('1-POLE-57_SW0001','1-POLE-57_SW0001','NOT SPECIFIED', (#115388));
#115390=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #115389,.MADE.);
#115394=PRODUCT_CATEGORY('part','');
#115395=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#115389));
#115374=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#115378=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#115381=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#115391=PRODUCT_DEFINITION('design','',#115390,#115387);
#115392=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 1-POLE-57_SW0001.',#115391);
ENDSEC;
END-ISO-10303-21;