ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('1-POLE_SW0001','2023-05-10T14:11:37',(''),(''), 'CREO PARAMETRIC BY PTC INC, 2021284','CREO PARAMETRIC BY PTC INC, 2021284','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#106613=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#106615=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#106614);
#106616=(CONVERSION_BASED_UNIT('INCH',#106615)LENGTH_UNIT()NAMED_UNIT(#106613));
#106619=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #106618);
#106620=(CONVERSION_BASED_UNIT('DEGREE',#106619)NAMED_UNIT(*)PLANE_ANGLE_UNIT( ));
#106622=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-4),#106616,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#106623=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT( (#106622))GLOBAL_UNIT_ASSIGNED_CONTEXT((#106616,#106620,#106621))REPRESENTATION_CONTEXT('ID1','3'));
#106625=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#106626=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#106625);
#106627=DESIGN_CONTEXT('',#106625,'design');
#106628=MECHANICAL_CONTEXT('',#106625,'mechanical');
#106629=PRODUCT('1-POLE_SW0001','1-POLE_SW0001','NOT SPECIFIED',(#106628));
#106630=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION', #106629,.MADE.);
#106634=PRODUCT_CATEGORY('part','');
#106635=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#106629));
#106614=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#106618=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#106621=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#106631=PRODUCT_DEFINITION('design','',#106630,#106627);
#106632=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 1-POLE_SW0001.',#106631);
ENDSEC;
END-ISO-10303-21;