ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('VDD2HW61-1KV00-0_SW0001','2011-09-22T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#71509=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#71511=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#71510);
#71512=(CONVERSION_BASED_UNIT('INCH',#71511)LENGTH_UNIT()NAMED_UNIT(#71509));
#71515=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #71514);
#71516=(CONVERSION_BASED_UNIT('DEGREE',#71515)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#71518=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-4),#71512,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#71521=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#71522=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#71521);
#71523=DESIGN_CONTEXT('',#71521,'design');
#71524=MECHANICAL_CONTEXT('',#71521,'mechanical');
#71525=PRODUCT('VDD2HW61-1KV00-0_SW0001','VDD2HW61-1KV00-0_SW0001', 'NOT SPECIFIED',(#71524));
#71526=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #71525,.MADE.);
#71530=PRODUCT_CATEGORY('part','');
#71531=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#71525));
#71510=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#71514=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#71517=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#71519=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #71518))GLOBAL_UNIT_ASSIGNED_CONTEXT((#71512,#71516,#71517))REPRESENTATION_CONTEXT('ID1','3'));
#71527=PRODUCT_DEFINITION('design','',#71526,#71523);
#71528=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VDD2HW61-1KV00-0_SW0001.',#71527);
ENDSEC;
END-ISO-10303-21;