ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('VJD1U664-J7700-000_SW0001','2011-09-22T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#78556=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#78558=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#78557);
#78559=(CONVERSION_BASED_UNIT('INCH',#78558)LENGTH_UNIT()NAMED_UNIT(#78556));
#78562=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #78561);
#78563=(CONVERSION_BASED_UNIT('DEGREE',#78562)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#78565=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-4),#78559,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#78568=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#78569=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#78568);
#78570=DESIGN_CONTEXT('',#78568,'design');
#78571=MECHANICAL_CONTEXT('',#78568,'mechanical');
#78572=PRODUCT('VJD1U664-J7700-000_SW0001','VJD1U664-J7700-000_SW0001', 'NOT SPECIFIED',(#78571));
#78573=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #78572,.MADE.);
#78577=PRODUCT_CATEGORY('part','');
#78578=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#78572));
#78557=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#78561=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#78564=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#78566=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #78565))GLOBAL_UNIT_ASSIGNED_CONTEXT((#78559,#78563,#78564))REPRESENTATION_CONTEXT('ID1','3'));
#78574=PRODUCT_DEFINITION('design','',#78573,#78570);
#78575=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VJD1U664-J7700-000_SW0001.', #78574);
ENDSEC;
END-ISO-10303-21;