ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('VJD1DTTC-F9C00-000_SW0001','2011-09-04T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010280','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#77915=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#77917=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#77916);
#77918=(CONVERSION_BASED_UNIT('INCH',#77917)LENGTH_UNIT()NAMED_UNIT(#77915));
#77921=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #77920);
#77922=(CONVERSION_BASED_UNIT('DEGREE',#77921)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#77924=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.540766937896E-5),#77918, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#77927=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#77928=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#77927);
#77929=DESIGN_CONTEXT('',#77927,'design');
#77930=MECHANICAL_CONTEXT('',#77927,'mechanical');
#77931=PRODUCT('VJD1DTTC-F9C00-000_SW0001','VJD1DTTC-F9C00-000_SW0001', 'NOT SPECIFIED',(#77930));
#77932=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #77931,.MADE.);
#77936=PRODUCT_CATEGORY('part','');
#77937=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#77931));
#77916=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#77920=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#77923=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#77925=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #77924))GLOBAL_UNIT_ASSIGNED_CONTEXT((#77918,#77922,#77923))REPRESENTATION_CONTEXT('ID1','3'));
#77933=PRODUCT_DEFINITION('design','',#77932,#77929);
#77934=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VJD1DTTC-F9C00-000_SW0001.', #77933);
ENDSEC;
END-ISO-10303-21;